Flatness accuracy As per IS: 2285-2003
Flatness accuracy As per IS: 2285-2003
Stress relived after rough Machining Hardness between 170 to 220 BHN
MS Fabricated stand with levelling provision
Anti-vibration pad are provided as required
T-slot, grind slot and taped holes are provided as required
Rexene cover
Special sizes are available as per Requirement
| SI NO | Surface Plate dimension (mm) |
| 1 | 2000x1500 |
| 2 | 2500x1000 |
| 3 | 3000x2000 |
| 4 | 3000x2500 |
| 5 | 3000x3000 |
| 6 | 4000x2500 |
| 7 | 4000x3000 |
| 8 | 4000x4000 |
